Product description

Pondfinish TM is a high-quality 3 component quartz and epoxy mortar especially developed for the finish of pond edges. After the application and hardening, Pondfinish TM possesses a durable, stone-like surface, looking like stone sheet.

Application

Pondfinish TM is used to improve the edges of a pond or other surfaces in and around a pond. Pondfinish TM can be applied to different kinds of plastic sheets, concrete, steel, and stone-like materials.

User instructions

Stir component A until it becomes a homogeneous mixture. Add the whole amount of component B, mix for another 3 minutes. Pour the mixture onto the surface to be treated and use a big brush to distribute it to a thin layer. Strew component C onto the still wet layer, use a roller to lightly press the material onto the layer. Excessive material can be brushed away after the hardening. The processing time depends on the temperature. At 20°C, the processing time is about 15 to 30 minutes which guarantees fast results. The processing time is prolonged at lower temperatures. The product is not suitable to be processed at temperatures below 5°C. Consumption depends on the kind of surface and the thickness of the layer. 2.5 kg of Pondfinish TM (components A, B and C) will cover 0.75 to 1 m², depending on the thickness of the layer applied.

Remarks

The surfaces to be treated have to be clean and free of oil and grease, as well as completely dry to guarantee good surface adhesion. When applied on wood and concrete, these materials have to be thoroughly dry inside as well.

It is recommended to wear protective gloves and clothing when processing this product. Tools have to be cleaned immediately after the application using a solvant (thinner).Once hardened, Pondfinish TM can’t be removed from tools.