Product description

Pondfix TM is a two-component PCC system mortar. The system consists of a cement-based mortar (component A) and an emulsion of synthetic resins (component B). The final product is water-tight, has a high chemical resistance and high compressive and tensile strengths.

Application

Pondfix TM can be used to repair leaky ponds, to place boulders natural and artificial stones, tiles and slabs, to design water courses, waterfalls and fountains. The product adheres to steel, glass and a variety of synthetic materials and therefore can be used to install these. Pondfix TM is particularly suitable to give brickwork ponds a water-tight lining and finish. Pondfix TM is an excellent means for filling and sealing joints, cracks, seams and supplies. Rigid connections and seams, for example steel on concrete or stone, can be made water-tight. Special polymers in the product provide for its excellent adhesion to the various surfaces.

User instructions

stiffening. To guarantee a good adhesion to the surface, the surface to be treated has to be clean and free of any remaining organic particles. If the product is applied to foils, it is recommended to make sure the foil is perfectly dry and to then roughen up its surface using sanding paper. When later filling the pond, keep an eye on the acidity of the water to ensure an advantageous environment for animals and plants. Freshly applied Pondfix TM can increase the acidity of the water. When exhibiting an unfavourable acidity, the water should be replaced (fully or in part). Both components are mixed in a concrete mixer until a homogenous mix is obtained. The consistency depends on the respective task, i.e. how stiff or plastic it has to be. The possible consistency for processing ranges from kneadable to highly viscous. The mortar is applied with a steel trowel or a ladle. The used tools are to be cleaned with water immediately after the application.